Ventilation Discharge and Air Inlet
Ventilation Discharge and Air Inlet
The covers are made of Corten steel plates, dimensioned as detached constructions in accordance with Danish norms and with material thickness according to static calculations. Min. material thickness 4 mm. Based on terrain category III - max wind 24m/sec.
Discharge/inlet may be constructed as follows:
- Discharge is made with straight or inclined top with bird net and cone at the bottom for gathering of rain water. The water is led out through the side of a tube ending in a discharger.
- Inlet is made with straight or inclined top with closing plate and slots in the cover, corresponding to the cross section of the tube, supplied with galvanised bird net and cone at the bottom for gathering of rain water. The water is led out through a tube ending in a discharger.
- Anchor bars M16 for adhesive mounting are supplied.
- All welding is performed by certified welders.
- Illustrations and static calculations are supplied for authority approval.
Optional surface treatment:
- Outer surface treatment for corrosion class C3 with five year guarantee against rust and peeling.
- Hot-galvanised according to DS/ISO 1461.
Other models are according to illustrations.
- Contact us for quotation.
- Connection channels are according to illustration.
- Delivery and installation are according to agreement.
|
 |